Home > JR2A high thickness cutting composite liquid
JR2A high thickness cutting composite liquid
Proportion
Put the liquid into running water with a ratio 1: 12～15 (avoid hard water such as well water or ground water).
Ingredients
Green product for the environment
Using range
Applied to all types of Wire-cutting Electric Discharge machine. It can be also used as cooling liquid for metal-cutting processes.
Features
Uniform and white finish surface without black & white stripe normally seen (cleaned by kerosene).
Suitable for large current cutting (over 3.5A ordinary machine tools, over 5A in WEDM-MS), compared with the traditional emulsified oil, cutting efficiency increased by 30%, surface finish degree improvement half grade, electrode wire loss reduced by 50% and molybdenum wire life is greatly extended.
Workpiece is easy to take off and clean, and the workbench is also clean.
Suitable for cutting within 1000mm thickness die steel, it is also suitable for multiple-cut.
Expire Date
12 Months
Package
Liquid using steel bucket (18 KG)
Precautions and appearance
The primary liquid is yellow and the diluted liquid is light milky white. This product has excellent cleaning performance, and add the primary liquid and water in proportion when replenishing liquid.
Please use the magnet to suck the workpiece before processing is finished, and avoid breaking molybdenum wire.
Recommended cutting parameters for between 400mm and 1000mm thickness die steel: Pulse width : 100μs, duty cycle: 1: 7, cutting current : 2.5A, appropriate to reduce the frequency tracking speed, from zero to steady cutting, and ammeter is basically no longer move.
